FEEDBACK

Sample Sentence for 反射面

Use your mouse
to draw a Chinese
character here
1
线
The keypoint of mechano-electrical unification design for reflector antennas is brie-fly described.
2
线
Finally, the shaped design of dual offset reflector antenna is studied.
3
This design strategy forces light entering the ring-shaped aperture to bounce back-and-forth between the two reflective surfaces.
4
The engineers used a diamond tip to cut all the reflective surfaces onto a single calcium fluoride disk.
5
The theory about parameter modeling of 3D common reflection surface stack was discussed in detail and modeling process was designed and realized.
6
Poor: Several conditions exist that could ( directly or indirectly) have an adverse effect upon product container appearance or quality. No reflective surfaces present over palletizers.
7
reflector
Reflectors can be a useful photography aid as the reflective surface, usually available in white, silver and gold stretched fabric, can fill in, reflect or diffuse light where necessary.
8
线
Based on these works, the influence that temperature variety affects on the reflector precision on orbit was studied and methods to eliminate this effect are discussed.
9
Methods: Using a particle model to show a reflection wavelet, all the particles from the same bed will coincide to a reflection surface.
10
线
Mesh reflector surface has become a hot technology in the researches of large deployable mesh antenna because of their great advantages in size and weight.
11
线
线
The radiation patterns of the plasma reflector antenna prototype are tested, which provide the experimental evidence for the feasibility of plasma reflector antenna.
12
In geophysics, reflection refers to the seismic energy or signal that returns from an interface of contrasting acoustic impedance, known as a reflector, according to Snell's law.
13
Based on the ideal shape model, variable thickness method is used to improve the uniformity of stress distribution of reflector, and the best thickness variation is determined.
14
In multichannel seismic acquisition where beds do not dip, the common reflecting point at depth on a reflector, or the halfway point when a wave travels from a source to a reflector to a receiver.